ph: Feel free to call 8 am-10 pm EST. 704-796-6839
Tysplane
These buildings are cast in heat resistant resin. they are suitable for indoor or outdoor use
Tool/Handcar Shed Footprint of 7.25" x 4-5/8" The Kit is $60 Watchman's Shanty footprint of 3-3/4"x 4" The Kit is $50 Out house foot print of 3' x 2.5" The kit is $35 1:20.3 scale Wood Ore Car This is a small resin kit that is very easy to put together. Here is a link to the instruction video: https://youtu.be/U5ghNFCMOEE The Kits are $16 each Link and Pin Connectors Here are link and pin coupler that will fit the Kadee #830 and the Bachmann Standard gear box. $2.25 each Here are extra Gas Cylinders. They are made of resin and are great for adding detail to any layout. They were sized to the Woodland Scenic gas cylinders so they will fit right into any existing scene. There are 6 gas cylinders included. Three tall three short. ( red and green not included just for comparison only). $10 for a set of 6. Can be purchased cheaper if bought in bulk. |
Here are the cylinders In a cluster . Unpainted ones
are $10 each plus shipping. Painted $12.
Engine House Exhaust Stack Kit.
I made this for my engine house. The kit is made of PVC,resin and vacuum formed parts, Easy to assemble.
$16 Each
Fire Barrel
UnPainted 1:20.3 or 1:22.5 G scale cast resin Fire barrel or just barrel with lid.. They are made of resin and are great for adding detail to any layout.. ..If you need some painted contact me directly.
$5.00 Each
I have Boat Available. With outboard motor and without.
With motor $36.00 . Without motor $27
Here are 6 Castings of different type boxes . The boxes are cast in Hydrocal. They are very detailed and ready for painting.
They are $6 each plus shipping
Here is a 1:20.3 Small Track side or Small Flat car Tank. It is 9'x5'x3' in 1:20.3 scale or 5.5"x3"x1.75" in actual size.
The tank is cast in hydrocal and the other parts in resin. It comes the top hatch and 2 types of drains or spigots. You can use one or both. Makes a great addition to you large scale layout.
$25.00 each
G scale Casket with Figure
$16.00 unpainted
New
Mining /Loggers Cabin
It has a 4.75"x 7" foot print. 8ft x 12ft in 1:20.3 scale. It is cast in a heat resistant Urethane Plastic. It has very good Detail to the finish. The door , windows and smoke stack are from my Scale Arts Parts.
$60
Build Video
https://youtu.be/1gEQdAzzqJw
Mine Cage Kit: There was not one anywhere on the market so I made my own kit. It is 1:20.3 scale and would be a great addition to a mining scene.
Kit $22.50
Mine Main Pulley and Beering
Small pulley and bearing $9
Large mine frame pulley $15.00
Have a newly made Floating G Scale Dock with ramp. Yes it floats. It can be put outside in a pond on your outdoor layout. Just attach ramp to shore and then to the dock. The dock is cast resin and was put together, then primed with a self etching primer. Then it was painted with acrylic paints.
The Dock size is 7.75" X 7.25"
Barrels of produce Available Painted or unpainted
Painted $30
Unpainted $20
Have a new kit for a G Scale Ash Pit. Made this kit for my personal layout. It is cast in hydrocal.
ph: Feel free to call 8 am-10 pm EST. 704-796-6839
Tysplane